Change Your IP within 30 second.

24/06/2011 12:42

This article will help you change your IP address in a minute. Just follow the next step is through.

1. Click "Start" in the lower left corner of the screen

2. Click "Run"

3. Type "command" and press OK

You should now be at a screen MS-DOS prompt.

4. Type "ipconfig / release" just like that, and press "enter"

5th Type "exit" and leave the prompt

6. Click on "My Network Places" or "My Network Places" on the desktop.

7. Click "Properties"

You should now be on a screen with something titled "Local Area Connection" or something like that, and if you have a connected network, all of your other networks.

8th Right click "Local Area Connection" and click "Properties"

9. Double click on the "Internet Protocol (TCP / IP)" from the list on the tab "General"

10th Click "Use the following IP address" under "General" tab

11. Create an IP address (It does not matter what it is. I just type 1 and 2 to fill the village).

12th Press "Tab" and it should automatically fill in the "Subnet Mask section" with default numbers.

13th Click "OK" here

14. Hit "OK" button

You should now be back at the "Local Area Connection" screen.

15th Right click again on "Local Area Connection" and go to properties again.

16th Return to the "TCP / IP Settings"

17. This time, select "Obtain an IP address automatically"

18 Hit the "Ok"

19. Click "OK"

20. You now have a new IP address

Remember that change dynamic IP address, not your ISP / IP.